FAQ: How To Pair Boltune Headphones?

Go to your iPhone settings >Bluetooth. Then hold the power button on the headphones until it enters pairing mode. The voice will say “pairing”. You’ll see “Boltune” pop up under devices on your iPhone, select it and it will pair.

Why wont my Boltune headphones connect?

In order to perform a “factory reset“, turn the earphones off. Then press and hold the multi function button for approx 10 seconds until the LED flashes purple twice. The device is now reset and can be paired with a new device.

How do you put wireless headphones in pairing mode?

Turn on the connecting Bluetooth device and place it within 3 feet (1 meter) of this unit. /POWER button (for the headphones) for more than 7 seconds while the Bluetooth headphones are turned off. When the indicator starts to blink quickly, release the button. The Bluetooth headphones enter Pairing mode.

Why is only one of my Boltune earbuds working?

Make sure that the mono setting is not enabled. Mono basically plays the same audio in both ears, but can sometimes cause this issue. The balance problem occurs when the balance scale may be turned all the way to the left or right. You can check for mono and balance settings in your device’s Accessibility settings.

You might be interested:  How To Connect Bluetooth Headphones To Lenovo Thinkpad?

How do I fix the Bluetooth pairing problem?

What you can do about Bluetooth pairing failures

  1. Make sure Bluetooth is turned on.
  2. Determine which pairing process your device employs.
  3. Turn on discoverable mode.
  4. Make sure the two devices are in close enough proximity to one another.
  5. Power the devices off and back on.
  6. Remove old Bluetooth connections.

How do I force a Bluetooth device to pair?

Go to settings, Bluetooth, and find your speaker (There should be a list of Bluetooth devices that you last connected to). Tap on the Bluetooth speaker to connect, then turn the speaker on AFTER you pressed the connect button, while your device is trying to connect to it.

Why are my Bluetooth headphones not showing up?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.

How do I put Boltune in pairing mode?

Go to your iPhone settings >Bluetooth. Then hold the power button on the headphones until it enters pairing mode. The voice will say “pairing”. You’ll see “Boltune” pop up under devices on your iPhone, select it and it will pair.

How do you charge Boltune wireless headphones?

1) Connect the charging port with any USB charging adapter or active computer USB port. 2) Charging will start automatically with LED indicator turning red. 3) The earphones are fully charged when LED indicator turns blue. Note: Make sure the battery is fully charged before putting the earphones away for storage.

You might be interested:  Question: How To Plug Iphone 7 Headphones Into Laptop?

How do you pair left and right earbuds?

– Press and hold the button on the LEFT earbud, and count to 2 or 3 until the light turns blue. -While continuing to hold the button on the left, press and hold the button on the RIGHT bud. -Now just hold together for another 10-15 seconds. Both will flash red/blue.

How do you pair t12 earbuds?

Open the charging case, earbuds auto power on and connect with each other; take out earbuds, earbuds enter paring mode. Put earbuds back into the charging case and close charging case, wireless earbuds auto power off, and charging starts.

How do you pair both earbuds?

First, you will need to pair the earbuds to each other, then to the phone.

  1. Turn them both on at the same time, holding down the buttons until they flash red then blue.
  2. Once they both are flashing at the same time, you’ll double press a button on ONE earbud.
  3. The earbud will say it’s connected.

Leave a Reply

Your email address will not be published. Required fields are marked *


Often asked: How To Connect Tt Bluetooth Headphones?

The first time you use the headphones, press and hold the Multifunction Button until the LED indicator flashes red and blue alternately. Now the headphones are in pairing mode. Activate Bluetooth® on your phone and search for nearby Bluetooth® connections. Contents1 How do I pair my TT Bluetooth headphones?2 How do you put TT headphones […]

Readers ask: What Are The Best Headphones In The World 2014?

Awards 2014: The 13 best pairs of headphones AKG Y50: best portable on-ears up to £100 and on-ear headphone Product of the Year. Bose QuietComfort 25: best noise-cancelling headphones. Grado SR325e: Best home on-ears £150-£300. Contents1 What is the most expensive headphone brand?2 Which headset is best for gaming?3 What are the top 5 earphones?4 […]