How To Connect My Taotronics Bluetooth Headphones?

Pairing Taotronics Bluetooth Headphones to Your Phone

  1. Activate your Taotronics Bluetooth headphones’s pairing mode.
  2. Go to Settings Connections Bluetooth.
  3. Select the correct headphones and pair with it.
  4. Your Taotronics Bluetooth headphones is now connected to the phone successfully.

Why won’t my Taotronics Bluetooth headphones connect?

If the transmitter cannot pair with your Bluetooth device, clear the pairing history by pressing the Power Button twice when the transmitter are on until the LED indicator flashes red and blue alternately. Then restart the transmitter to pair again.

How do you put Taotronics headphones in pairing mode?

Make sure the headphones and your Bluetooth® device are next to each other (within 3 feet / 1 meter). The first time you use the headphones, press and hold the Multifunction Button until the LED indicator flashes red and blue alternately. Now the headphones are in pairing mode.

You might be interested:  Question: How To Make Music Louder On Iphone With Headphones?

How do I connect my Taotronics Bluetooth headset to my laptop?

Pairing your headset with a Laptop

  1. Step 1: Put the headphones into pairing mode.
  2. Step 2: Turn on the Bluetooth on your Laptop by going to Bluetooth Settings.
  3. Step 3: Click on Add Bluetooth or other device in Bluetooth settings.
  4. Step 4: Choose Bluetooth from the list (see image below)

How do I connect Bluetooth headphones to pairing mode?

Turn on the connecting Bluetooth device and place it within 3 feet (1 meter) of this unit. /POWER button (for the headphones) for more than 7 seconds while the Bluetooth headphones are turned off. When the indicator starts to blink quickly, release the button. The Bluetooth headphones enter Pairing mode.

How do I reset my TaoTronics Bluetooth?

Tap and hold the Multifunction Touch Control of both earbuds for 10 seconds until the LED indicators flash three times to enter reset mode. Take out both earbuds, and they will pair with each other automatically.

How do I reset my TaoTronics Bluetooth adapter?

In order to perform a “factory reset”, switch on the TT-BA01 transmitter first. Press the power button 2 times. Then the transmitter must be switched off again. The transmitter is now set back and can be connected to a new device.

How do I pair my Iphone with TaoTronics?

Pairing Taotronics Bluetooth Headphones to Your Phone

  1. Activate your Taotronics Bluetooth headphones’s pairing mode.
  2. Go to Settings > Connections > Bluetooth.
  3. Select the correct headphones and pair with it.
  4. Your Taotronics Bluetooth headphones is now connected to the phone successfully.

How do I connect my TaoTronics to my Macbook?

Make sure Bluetooth is turned on, on both your Mac and your headphones. Open up Bluetooth on your Mac and search for devices. Select your headphones (they should be named with the model, like ‘Your Name’ AirPods or TaoTronics SoundLiberty 80. Wait for them to connect and then test the sound.

You might be interested:  How To Reset Jbl Wireless Headphones?

How do I pair my TaoTronics Bluetooth speaker?

How to Connect the TaoTronics Soundbar Bluetooth? Plug the sound bar to power, press and hold the Power Button until a beep is heard. The device is in the Bluetooth mode initially. When the indicator starts to flash fast, activate the Bluetooth function on your device and search for devices nearby.

How do I connect my Taotronics Bluetooth speaker to my computer?

Start to plug the pink jack into the mic input of your computer. Plug the blue jack into the audio output of your computer second. (Right click your audio icon in the lower right corner and select playback (the same with recording) and find the speaker, set it to default, exit out.

Why are my Taotronics headphones not working?

Please try to turn up the volume of the Bluetooth audio source device (such as TV or cell phone) to see if it can help; Please check if the audio input mode of the Bluetooth speaker has been switched to AUX mode and test it again.

Where is the multifunction button on Taotronics headphones?

When pairing for the first time, you need to hold down the multifunction button ( located in the middle ) for about 3 to 5 seconds. Release the button when the headphones start flashing red and blue lights. Red and Blue lights indicate that the headphones are in pairing mode.

Why is my Bluetooth not pairing?

For Android phones, go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile & Bluetooth. For iOS and iPadOS device, you’ll have to unpair all of your devices (go to Setting > Bluetooth, select the info icon and and choose Forget This Device for each device) then restart your phone or tablet.

You might be interested:  Quick Answer: How To Make Apple Headphones Work With Android?

How do I make my Bluetooth discoverable?

Step 1: Pair a Bluetooth accessory

  1. Swipe down from the top of the screen.
  2. Touch and hold Bluetooth.
  3. Tap Pair new device. If you don’t find Pair new device, check under “Available devices” or tap More. Refresh.
  4. Tap the name of the Bluetooth device you want to pair with your device.
  5. Follow any on-screen instructions.

Leave a Reply

Your email address will not be published. Required fields are marked *

Releated

FAQ: How Many Decibels Iphone Headphones?

The top volume on an Apple music player, like the iPhone, is 102 decibels, about as loud as a leaf blower. Keeping the volume at 70 percent, or 82 decibels, is safe for eight hours a day. Contents1 How loud is too loud for headphones iPhone?2 How many decibels are headphones?3 How many decibels is […]

FAQ: How Long Does It Take For Beats Wireless Headphones To Charge?

It takes about 2 hours to fully charge a dead battery using the AC adapter. It may take longer if you’re charging via USB from your laptop or other device. If your headphones aren’t charging properly, reset your Studios. Contents1 How long do you charge Beats Wireless headphones?2 How do you know when your Beats […]