Check for debris, damage, or loose connections Check for debris in the headphone port on your iPhone, iPad or iPod touch. Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. Look for debris on the meshes in each earbud. Firmly plug your headphones back in.

Why are my headphones not working when I plug them in my phone?

It’s possible that you have paired your phone with a wireless device that has turned off your headphones. First, you can check to see if this is the problem by turning off Bluetooth. If they’re still not working, there is another thing to check with Bluetooth. Your second option is to go to Settings, then Connections.

How do I get my iPhone to recognize my headphones?

For iPhones Running iOS 11 Or Newer Then, press and hold the audio box in the upper right-hand corner of Control Center. Next, tap the AirPlay icon and make sure there’s a check mark next to Headphones. If the check mark is next to a different device, you can switch to headphones by tapping on Headphones.

Why when I plug in my headphones the speakers still play iPhone?

Check for a loose connection. Headphone connections usually become loose when headphone jacks accumulate too much dust, dirt, or lint. This unwanted debris can physically block your headphone jack, preventing the plug from clicking in completely. Try taking the dirt out using a cotton swab or a tape-wrapped paperclip.

Why does my phone not recognize my headphones?

Check audio settings and restart the device There’s also a chance the problem isn’t with the jack or the headphones you’re using but has to do with the device’s audio settings. If this is the case, you’ll be able to sort it out in no time. The most obvious fix is to check if you muted your phone or put the volume down.

Why are my earphones not connecting?

Check for debris, damage, or loose connections Check your headphone cable, connector, remote and earbuds for damage, such as wear or breakage. Look for debris on the meshes in each earbud. To remove debris, gently brush all openings with a small, soft-bristled brush that’s clean and dry.

How do I fix my iPhone 7 not detecting my headphones?

Question: Q: iPhone 7 headphones not working

1. Check for debris in the headphone port on your iPhone, iPad or iPod touch.
2. Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage.
3. Look for debris on the meshes in each earbud.
4. Firmly plug your headphones back in.

Why did my headphones suddenly stop working?

Earphones/earbuds typically stop working due to wire strain, faulty wiring from the manufacturer, moisture damage, or damage to the drivers that produce the sound. These occurrences may cause shorts in the electrical flow of audio or complete disconnection between the drivers and the audio source.

How do I change the headphone setting on my iPhone?

Go to Settings > Accessibility > Audio/Visual > Headphone Accommodations. Tap Custom Audio Setup. Follow the instructions on your screen. When finished, tap Use Custom Settings to apply the custom settings suggested based on your choices.

How do I get my sound to play through my headphones instead of speakers?

How to swap between headphones and speakers

1. Click the small speaker icon next to the clock on your Windows taskbar.
2. Select the small up arrow to the right of your current audio output device.
3. Select your output of choice from the list that appears.

Where is audio settings on iPhone?

Adjust the audio settings on iPhone

1. Go to Settings > Accessibility > Audio/Visual.
2. Adjust any of the following: Mono Audio: Turn on to combine the left and right channels to play the same content. Balance: Drag the Left Right Stereo Balance slider.

How do I get my headphones to work again?

When your headset is playing only in one ear, rule out possible device setting issues then follow these quick fixes to get your earphones working again. Ruling Out Phone or PC Settings

1. Try another pair of earphones.
2. Restart the device.
3. Check the settings.
4. Clean the headphone jack.

Where is audio settings?

To adjust your sound settings:

1. Press menu, and then select Apps & More > Settings > Sound.
2. Navigate to the setting you want to change, and press ok. The options for that setting appear.
3. Scroll up and down the list to select the desired option, and then press ok to set it.