Your iPhone is stuck on headphone mode because it thinks headphones are plugged into the headphone jack or Lightning port, even though they’re not. This is usually caused by a problem with the headphone jack or Lightning port itself. 99% of the time it’s a hardware problem, not a software problem.

Why does my iPhone have no sound and says headphones?

Answer: A: There might be something in the headphone jack, maybe lint, dirt, or something else in there. You might be able to get it out by connecting the headphones 5-10x or spraying compressed air into the jack. If that doesn’t do it, try resetting or restoring the iPhone.

How do you get out of headphone mode?

How to Turn Off Headphone Mode on Android

1. Remove your headphones from the phone again.
2. Clean the headphones jack.
3. Restart your Android phone.
4. Do a soft reset of your phone.
5. Use an app to override audio controls.
6. Do a hard reset or a factory reset.

Why is my iPhone 6s stuck on headphone mode?

Your iPhone 6 is stuck in headphone mode because it’s being tricked into thinking headphones are plugged. Your iPhone can get tricked by a minor software glitch (usually not the problem) or by some physical debris lodged deep inside the headphone jack (usually the problem).

Why are my headphones not working when I plug them in?

Dust, lint and dirt may block the connection between the jack and the headphones. Check for this and clean the jack using a cotton swab damped with some rubbing alcohol to get the lint and dust out, or use a can of compressed air if you have one close by. Plug the headphones back in and see if they work.

How do I clean my headphone jack?

Using paperclip and tape After putting your phone in your pocket, lint may be stuck on your Android/iphone headphone jack. The paperclip and tape method is best for tactfully removing these textile fibres without any damage caused.

Why is my phone showing earphone?

In many cases, this Headphone Icon problem is caused by some dirt or unwanted thing in the 3.5 mm Headphone Jack of the Android Phone. Remove the Headphone and clean the Hole of the jack. Do not Use any Sharp Pointed thing like a pointed Tweezers.

How do I fix my iPhone headphones?

If your headphones don’t work with your iPhone, iPad, or iPod

1. Check for debris in the headphone port on your iPhone, iPad or iPod touch.
2. Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage.
3. Look for debris on the meshes in each earbud.
4. Firmly plug your headphones back in.

How do I change the headphone setting on my iPhone?

Go to Settings > Accessibility > Audio/Visual > Headphone Accommodations. Tap Custom Audio Setup. Follow the instructions on your screen. When finished, tap Use Custom Settings to apply the custom settings suggested based on your choices.